top of page

EAMICRETE IM 200

Internal Membrane and Integral Hydrophobic Waterproofing
Concrete Admixture

PRODUCT DESCRIPTION

EAMICRETE IM 200 is an integral crystalline
waterproofing concrete admixture that is formulated
to produce highly durable waterproofing concrete
with improved physical and mechanical properties.
EAMICRETE IM 200 active ingredients react in the
presence of moisture in concrete with the
by-products of cement hydration, creating a nonsoluble
crystalline formation throughout the pores
and capillary inside the concrete. This newly formed
crystalline internal structure reduces concrete
permeability thus blocking & preventing water and
soluble salts from penetrating from all directions.
EAMICRETE IM 200 will protect concrete and steel
reinforcement from deterioration.
If there is risk of new crack formation after concrete
hardening due to settlement or shrinkage, the
incoming water through this new crack will start the
crystallization process again and new crystals
formations are formed filling the new crack
introducing a live waterproofing barrier system.
EAMICRETE IM 200 is formulated on a blend of
synthetic polymers that are manufactured under
controlled consistent quality procedures.

PRODUCT DOCUMENTS

Technical Data Sheet

TYPICAL APPLICATIONS

EAMICRETE IM 200 is formulated to be used in:

  • Water retaining structures, potable water

  • tanks & reservoirs.

  • Sewage treatment plants & septic tanks.

  • Secondary containment structures.

  • Water retaining walls, elevator pits & dams.

  • Below grade structures, piles, foundations

  • and basement.

  • Swimming pools.

  • Tunnels and subway systems.

  • Parking structures.

  • Precast concrete elements

  • Bridges and related structures

PRODUCT FEATURES

  • Liquid form: easy to be added and dispensed
    directly in the batch plant

  • Maximum waterproofing protection.

  • Waterproof for concrete from any direction
    (i.e. positive or negative side)

  • Protects the steel reinforcement from corrosion.

  • Withstands high water pressures (up to 14 bars).

  • Reduces the rate of carbonation.

  • Reduces concrete shrinkage and cracking.

  • Suitable for use in self compact concrete.

  • Water-based, non-flammable, non-toxic, chloridefree
    and non-corrosive.

  • Self-healing future for static cracks up to 500
    microns.

STANDARDS

EAMICRETE IM 200 complies with the requirements of the
following standards:

  • EN 934 Part 2: "Concrete admixtures, Definition,
    requirements, conformity, marking and labelling",
    Table 1 and Table 9

  • ES 1899 Part 1, Table 1 and Table 9.

  • ASTM C 494, Type S: Special concrete admixture.

bottom of page