top of page

EAMICRETE LX

Waterproof & Bonding Additive

PRODUCT DESCRIPTION

EAMICRETE LX is a styrene butadiene copolymer latex, specifically formulated to be used as a combined waterproof, adhesive and plasticizer for cementitious mixes. It is suitable to use with all types of cement and aggregate and is simply added as a total or partial replacement for the gauging water. It surrounds each cement particle and forms a polymer lattice throughout the mix allowing even cure, giving additional adhesion between the cement matrix and the aggregate.
EAMICRETE LX based slurries form a protective rubber - like skin which is tightly bonded to the substrate. Unlike some polyvinyl acetates and acrylics, EAMICRETE LX does not re-emulsify and once cured, the bond is unaffected by water or water vapor. EAMICRETE LX can be used with advantage as an economical replacement for epoxy, polyester and other resin mortars.

PRODUCT DOCUMENTS

Technical Data Sheet

TYPICAL APPLICATIONS

  • Basements.

  • Swimming pools and showers .

  • Sludge tanks and ducts.

  • Potable water, sewage and mild

  • Chemical holding tanks.

  • Tunnels and Underpasses.

  • Computer and plant rooms.

PRODUCT FEATURES

  • Excellent bond, flexural and tensile strength.

  • Extreme resistance to water and water vapour.

  • Thin screeds which are water and vapour proof.

  • Low water / cement ratio.

  • Resin performance at economic cost.

  • Reduce drying shrinkage.

  • Easier site use.

  • Compatibility with all cement.

  • No expensive surface preparation.

bottom of page