top of page
EAMIPREMIX PLASTER PP2
Cementitious Ready Mix Plaster & Rendering
PRODUCT DESCRIPTION
EAMIPREMIX PLASTER PP2 is a polymer modified, cementitious ready mix plaster, to carry out traditional plastering that works in a clean and speedy manner while keeping a homogeneous mix. Due to its high content in additives, it performs a better bonding, shrinkage control as well as workability and curing. EAMIPREMIX PLASTER PP2 can be applied traditionally by hand or by using modern plaster-spraying machines.
PRODUCT DOCUMENTS
Technical Data Sheet
TYPICAL APPLICATIONS
-
The plaster should be ready for application by machine or manually with a plastering trowel.
-
Apply the plaster on the prepared surface at a thickness between 10 and 25 mm in one or two layers.
-
Finish the surface with a soft synthetic sponge and a steel float.
-
Let the product set properly on the surface before any curing.
-
If more thickness is required, the application should be done in 2 or 3 layers. Let the first layer be roughed and cured it. Apply the second layer or the third at least 48 hrs between the layer and the other done before.
PRODUCT FEATURES
-
Covers wall defects.
-
Fills wall cracks.
-
Levels wall surfaces.
bottom of page