DemanditE may be applied by brush, roller or airless spray equipment. When applying by roller, a maximum 19 mm (3/4") nap polyester or polyester blend with nylon or lamb’s wool and with beveled ends and a phenolic core is recommended. A 460 mm (18") wide roller frame with 57 mm (2 14") inside diameter is also recommended. Plan the work ahead to make sure that proper staging is provided to maintain a wet edge. Apply EAMIC Dryvit in one continuous coat, maintaining a wet edge as the application proceeds to a natural break. The roller cover must be kept fully loaded as the application proceeds. Do not stretch out the application by rolling with a dry roller. The last leveling roller strokes should always be in the same direction. Do not cut in around openings prior to overall application, but rather, do the cut-in work as the application proceeds. A 100 mm (4") wide roller is recommended for cutting in. Where cutting in, the DemanditE may be thinned down with water to prevent excessive build-up.