top of page

EAMIPRIME EP 1504 

Pigmented, Epoxy Resin - Based Primer Sealer

PRODUCT DESCRIPTION

EAMIPRIME EP1504 is a two components, solvent-free (100 % solid), moisture &vapor barrier, tolerant, low VOC, odorless, low viscosity pigmented epoxy resin-based primer and sealer. It is specially formulated to prime & seal concrete and masonry substrates for high performance applications.
It is used as a part of flooring systems with high adhesion to porous concrete surfaces. It provides a very good resistance to aqueous, alkaline and saline solutions.

PRODUCT DOCUMENTS

Technical Data Sheet

TYPICAL APPLICATIONS

EAMIPRIME EP1504 is used for:

  • Moisture and water vapor barrier primer on substrate concrete or cement based screeds where EAMIC TRETOL Flooring Systems will be applied.

  • Moisture and water vapor barrier primer beneath sports surfaces such as running tracks, artificial turf …. etc.

  • Moisture and water vapor barrier primer beneath conventional, classic floor finishes such as PVC, linoleum, carpet, parquet, tiles ….. etc.

  • Promote adhesion between substrates and epoxy resin based floor coating, epoxy resin self leveling floor toppings and epoxy resin floor screed.

  • Protects the substrates against the negative effect of osmosis, bubbles with exposure to moisture from the soil.

  • To bond epoxy flooring to concrete, steel and masonry products.

  • Sealing concrete substrates providing more protection against the chemical reagents, water and water-soluble salts.

PRODUCT FEATURES

  • Easy to apply by suitable brush or roller.

  • Low VOC, odorless and non - toxic.

  • Pigmented (Assure correct coverage).

  • Excellent rapid cure even at low temperature.

  • Excellent curing under humid conditions.

  • Superior adhesion to dry surfaces with excellent tensile & flexural strengths.

  • Low viscosity and excellent penetration power.

  • Very good anticorrosion properties.

  • Excellent resistance to water, waste water and salt water.

STANDARDS

EAMIPRIME EP1504 complies with the requirements of:

  • ASTM C - 881Type I, Grade 1, Class B & C.

  • EN 1504, Part 2: “Products and Systems for the Protection and Repair of Concrete Structures - Definitions, Requirements, Quality Control and Evaluation of Conformity - Part 2: Surface Protection Systems for Concrete, Principle 1 and 2”.

  • DIN EN 7783.

bottom of page